Imagine the following scenario: you’re ready to leave the house or building, but nothing happens when you activate the garage door opener. So, what’s next?
Most likely, you have a defective torsion spring in your garage door that requires urgent replacing or fixing.
A malfunctioning door opener can trigger a lot of issues and might even put you in danger.
As a result, you should never attempt to repair torsion springs on your own.
It is a task that only certified garage door technicians are capable of doing.
Replacing defective torsion springs is too risky, and it necessitates excellent expertise and years of experience.
We recommend contacting the nearest garage door experts for any overhead door spring restoration issues.
In San Francisco, Garage Door Pros San Francisco is always ready to serve you anytime.
Torsion Springs for Garage Doors: What are They?
Do you know that they are one of the most critical parts of your garage door?
The torsion spring helps the overhead door opener (manual or automatic) to rise and fall smoothly.
Torsion springs are what keep the garage door from performing accurately.
You may be familiar with this component, but some property owners often ignore them.
This discussion will give details on the importance and types of torsion springs for your garage door.
THINGS YOU NEED TO KNOW
- They are long springs attached on top of the garage door.
- This device helps in the process of raising and lowering the garage door.
- The rust and extreme weather condition can weaken them, causing severe damage.
- A torsion spring’s total life period is approximately seven to ten years (rated at 10,000 cycles).
THE TYPES OF TORSION SPRINGS
The primary function of this door’s mechanism is to hold mechanical energy.
It assists in the opening and closing of the garage door.
The stored energy in the spring intercepts in pulling the door’s weight when the spring tension is released while the door opens.
Torsion springs are available in a variety of types, including:
Early Set – The torsion springs are found in the middle portion of the torsion pipe.
A particular type of device is placed on the line’s both ends, opposite the cable drums.
Standard – A type of torsion spring mounted above the garage entrance and is commonly found on residential garage doors.
The springs are supported by a metal pipe that runs through the middle.
If your overhead door is light, one standard spring should suffice; otherwise, use two or more depending on the door’s weight.
Torque Master – This form of torsion spring is thought to be the most reliable of all.
A revolving cone at the end of each torsion shaft holds these springs in place.
Steel Rolling Door – These torsion springs are often used in office properties or buildings.
They are mounted inside the torsion barrel that supports the moving overhead door.
Ways to Determine Whether a Torsion Spring Is Broken
Inspect the appearance of the Torsion Springs
Just by looking at the torsion spring is an easy way to tell whether it is damaged or not.
Watch out for these warning signs:
- The spring extends, which means there is no mechanical tension or force. It is often noticing when the overhead door is closed.
- When a torsion spring approaches the end of its useful life, it loses tension and breaks. Check where the split happened; there should be a noticeable gap.
Examine the Garage Door’s Structure and How it Operates
Keeping an eye on the garage door itself is one way to see if the torsion spring requires replacing.
Make sure to look for these indicators:
- The garage door won’t open completely.
- The garage door appears to be crooked or off-track.
- The top portion of the door is twisted or deformed.
- The garage door rises a few inches above ground then shuts down.
- The garage door slams shut with a loud bang.
- The cables that are connected to the springs are hanging.
Be Mindful of Extreme Noises
When a torsion spring snaps, it releases a tremendous amount of pressure and energy, as well as a great deal of noise.
Torsion springs revolve throughout a shaft and are mounted above the entrance.
The torsion spring will spiral out of the pipe as it splits, creating a sharp, loud sound.
Garage doors have a buzzing electronic sound to them.
The echo of a broken spring is not the same as this.
For more information on spotting a defective garage door torsion spring, watch this video.
Don’t Try to Fix it. Call The Pros In San Francisco!
It’s hard to underestimate the dangers of removing your garage door torsion spring.
To put it bluntly, never attempt to do it.
That is why we are here; to keep you safe and correct the problem.
The torsion spring replacement generally requires advanced experience and resources.
Safety precautions are needed for the proper repair of these components.
Contact the Garage Door Pros San Francisco experts for garage door repair services.
We’ll get it fixed properly and securely in no time!